Precision agriculture

Autonomous irrigation for every field

Sensors measure the soil. A gateway decides when to water. Valves open and close on their own — even without internet.

Request a demo How it works

How it works

Three steps. Then it runs itself.

The same loop a grower already does by hand — measure, decide, water — now done at the edge of the field.

N Field Node Measure G Gateway Decide V Valve Node Act
01 · MEASURE

Field Nodes read your soil

Moisture, temperature, and salinity — zone by zone, around the clock. Solar powered, no wiring. Data transmits wirelessly to the gateway in real time.

02 · DECIDE

The gateway makes the call

It cross-references soil conditions, local weather, and forecast data to determine when, where, and how long to irrigate. If connectivity drops, the gateway falls back to on-device logic using its own sensors and stored rules — decisions never stop.

03 · ACT

Valves take action

Once the gateway issues a command, Valve Nodes execute — delivering water only where it's needed, for precisely the right duration. Flow rate and pressure are monitored continuously to ensure every drop is accounted for.

Hardware

One system. Three devices.

Start with one zone. Add nodes as the farm grows. You only need one gateway per property.

Field Node with solar panel
SENSOR

Field Node

Soil moisture, temperature, and EC. Solar. RF to the gateway.

$1,650
Get a quote
Gateway in the field
HUB

Central Gateway

Weather + edge computer. Makes irrigation decisions on site.

$1,950
Get a quote
Soil layers
ACTUATOR

Valve Node

Opens and closes irrigation. Monitors pressure and flow.

$950
Get a quote
Starter kit: $4,550
1 gateway + 1 Field Node + 1 Valve Node
Talk to us

Why it matters

Water, yield, and time

Less water

Irrigate from real soil data, not a fixed timer. Every gallon goes where it's actually needed.

More yield

Consistent, even moisture across every zone. No more over-watering one side while the other dries out.

Your time back

No more walking valves, checking soil by hand, or adjusting schedules. The system handles it.

Always on

If connectivity drops, the system keeps irrigating on stored logic. It syncs when the connection returns.

Software

Included with membership

The hardware runs the field. These tools help with planning and diagnosis — they are not required for irrigation.

PLAN

Planting calendar

Planting windows from your location and season.
SOIL

Soil analysis

Turn a lab test into a plan for a specific crop.
SCAN

Disease detection

Photo in, diagnosis and treatment notes out.
ASSIST

Assistant

Agronomy questions, answered when you are still in the field.
SOLAR

Solar Compass

Azimuth and tilt for mounting panels on site.
MARKET

Harvestor

Crop prices and planting recommendations in one dashboard.

Learning

Guides for the field

Short reads on sensors, soil, and the tools that make irrigation decisions on their own.

Soil sensor in a crop row
BASICS

Introduction to precision agriculture

Data, sensors, and on-device logic so you treat each zone by what it needs — not the whole field the same way.

  • What soil sensors measure
  • How climate affects planting
  • Why zone-level data saves water
Soil profile and crop roots
SOIL

Understanding soil health

Moisture, salinity, and temperature tell you when to irrigate and when to wait — before the crop shows stress.

  • Moisture and irrigation timing
  • Salinity and nutrient uptake
  • Why one reading is not enough
Irrigated field
TECH

Technology transforming agriculture

Solar nodes, a field gateway, and valves that act on stored rules — even when the tower is down.

  • IoT field nodes
  • Edge decisions on the gateway
  • Automated valves

FAQ

Common questions

Does it work without internet?

Yes. Irrigation decisions run on the gateway. When the connection returns, data syncs.

Do I need grid electricity?

No. Field Node, gateway, and valve are solar-powered.

What does a starting system cost?

$4,550 for one zone (gateway $1,950 + Field Node $1,650 + Valve Node $950). Extra zones add nodes. Software is on the Plans page.

How long is install?

About 45 minutes for a typical single-zone setup.

What crops is this for?

Open-field work: row crops, orchards, pasture. Sensor placement is set for your crop and soil during setup.

How can I contact the team?

Email sales@furrowtech.com or call +1 979 933 7939. Bryan, TX. We respond within one business day.

Next step

Walk the system with us

Tell us the crop, acres, and how you irrigate today. We will map a kit that fits.

Request a demo Irrigation page